Description

Placement of Mount:
Passenger side floor, in front of seat

Drilling Requirements:
No – attaches to seat studs

Seat Configuration:
Bucket/bench

Pole:
Purchased Separately

Weight:
10.7 lbs.

Material:
Powder Coated Steel

Dimensions:
A = 16″, B = 5″, C = 5.5″, Hole Center = 13″

Notes:
This base will not interfere with factory installed console or 4WD lever. One 4” riser is included with this vehicle base. Riser allows optimized placement of mount with a minimal amount of intrusion of passenger leg space. This base will not fit trucks with power take-off (PTO) on the transmission. If your vehicle has the PTO accessory on the transmission, you will need the RAM-VB-178.

*IN STOCK!